TIER Stepped Cabinet Pull
Size is measured center-to-center (C-C), not overall length. View the size guide →
- Delivery
- Normally prepared in 1–3 business days. Transit depends on destination; contact us for a current estimate before ordering.
- Shipping
- US$9.95 below US$150; free standard shipping from US$150 after product discounts. Local-currency equivalent shown at checkout.
Fit & installation
Match the center-to-center hole spacing. Check overall length, projection and clearance before drilling.
Standard 25 mm screws are included. Measure the total panel thickness at the fixing point. For thicker or double-panel fronts, contact us to confirm screw length.
Installation guide Ask about fitReturns 14-day cancellation rights; additional eligible 30-day returns
Eligible UK and EU consumers may cancel or withdraw within 14 days of receiving the goods, or the last delivery of an order supplied in parts. Additional voluntary 30-day returns apply to eligible items. Customers normally pay return postage to our United States address. Statutory rights take precedence.
Shipping & returns policySamples How to order
For an eligible in-stock sample, add one piece in the finish and size you want to compare. You can use Special instructions in the cart to identify your sample items.
The Design Sample Credit programme currently serves the US, Canada and Australia. For a UK or EU project, contact us for finish and sizing advice before ordering samples.
Sample options & credit termsProduct safety contacts
- Manufacturer
- OBJECTTONE LLC
30 N Gould St Ste N
Sheridan, WY 82801
United States
hello@objecttone.com - EU responsible person
- Kodelix Consulting Osaühing
Tartu mnt 67/1-13b, Kesklinna
10115 Tallinn, Harju County
Estonia
info@kodelix.org
For returns, contact hello@objecttone.com first. The EU responsible person does not accept returns.
Solid brass · Statutory consumer rights
TIER is a solid brass cabinet pull with a slim cylindrical bar, softly flared ends and stepped circular bases. Two mounting holes secure it to the cabinet front. Match the selected C-C spacing to your cabinet before comparing finishes and overall proportions.
Design details
- Use: Cabinet doors, drawers and furniture
- Material: Solid brass
- Country of origin: China
- Finish: Natural Brass, Antique Brass, Matte Black. Select the required finish and size in the variant selector; availability varies by variant.
Design & cabinet styling
The stepped bases add definition to an otherwise restrained bar. They can echo framed cabinet moldings or introduce a small turned detail to a flat-front design.
Measurements
Measurements are shown in millimetres and inches. Select the exact size and finish above before ordering.
| Selected size | Overall | Projection | Weight |
|---|---|---|---|
| 96 mm C-C (3.78") | 165 mm (6.50") | 35 mm (1.38") | 153 g |
| 128 mm C-C (5.04") | 200 mm (7.87") | 35 mm (1.38") | 180 g |
| 160 mm C-C (6.30") | 235 mm (9.25") | 35 mm (1.38") | 208 g |
| 192 mm C-C (7.56") | 270 mm (10.63") | 35 mm (1.38") | 238 g |
| 224 mm C-C (8.82") | 313 mm (12.32") | 35 mm (1.38") | 264 g |
Grip & cross-section
- Grip diameter: 12 mm (0.47 in)
- Minimum connection diameter: 7 mm (0.28 in)
Using the size comparison
The TIER photo size comparison follows the selected finish and remains available across all five C-C sizes. Use it to compare proportions, then check the selected-size measurements and dimension diagram for mounting-hole spacing, overall length and projection. The photo comparison is a visual selection guide rather than an engineering drawing.
Selection questions
Where are the stepped details?
They appear in the circular base and end detailing shown in the product views. The bar remains slim and cylindrical.
Does C-C mean overall length?
No. C-C is the distance between mounting-hole centers. Check the separate overall-length measurement when planning the visual scale.
Installation & care
Installation — two-hole pulls
For replacements, match the center-to-center (C-C) distance between the existing screw holes; this is different from overall length. Check panel thickness and clearance before drilling. Hold the pull outside the cabinet front and insert both screws from inside. Start the threads by hand, align the pull and tighten evenly with a hand screwdriver. Do not overtighten.
Mounting screws
Standard 25 mm mounting screws are included. Measure the total panel thickness at the fixing point, including any applied or double-panel layers. If you need a different screw length, add the total thickness to your order notes or contact us before ordering so we can confirm the appropriate option.
Care
Wipe with a clean, soft cloth. For marks, use a lightly dampened cloth with mild soap, remove any residue and dry thoroughly. Avoid abrasive pads, metal polish and harsh cleaners. Do not leave moisture or cleaner on the hardware.
Coordinate the collection
Compare the individual dimensions and fixing formats of other TIER designs.
Project support
For project support, send the product name, finish, size, quantity, project location and target order date. Include panel thickness and existing hole spacing for replacements. Contact our team or explore the Trade program.
Warranty & Support
Statutory consumer rights apply to UK and EU purchases. Our voluntary 10-year limited mechanical warranty currently covers the US, Canada and Australia only, under its published territorial terms. Contact us if you need help with a product. Warranty terms and regional eligibility · Ask about fit
For orders to the United Kingdom and European Union: under its current territorial terms, the voluntary 10-year mechanical warranty is limited to the United States, Canada and Australia. Your statutory consumer rights remain unaffected. Contact us for help with a product issue.
Complete the room.
Matching hardware from the same design family.