Room Edits
Choosing Natural Brass Pulls for a Walnut Kitchen
Natural brass gives walnut cabinetry a warm highlight. In this kitchen, pale stone and warm white surfaces leave the walnut grain visible, while FERRULE’s small collars repeat across the doors and drawers. The finish stays consistent as the hardware changes length.
AI-generated styling concept.

Where to use a long pull
The full-height cabinet doors each carry a vertical FERRULE Long Cabinet Pull. Its 416 mm (16.38 in.) center-to-center spacing and 500 mm (19.69 in.) overall length give the tall fronts a longer line to follow. Place the handle where it is comfortable to reach and check its clearance next to adjacent doors.

How to size drawers and lower doors
The lower cabinet fronts use the FERRULE Collared Cabinet Pull at 192 mm (7.56 in.) center-to-center and 234 mm (9.21 in.) overall. The pulls run horizontally on the drawers and vertically on the lower doors. This keeps the hardware in proportion to the smaller fronts while repeating the same finish and shape.
What to measure before ordering
For existing two-hole hardware, measure between the hole centers and choose the matching size. For a new installation, mark the pull’s full length on the front with painter’s tape and check that the supports land on a flat area. Use the Size & Placement Guide to compare mounting spacing, overall length, and projection.
Hardware in this concept
- Tall cabinet doors: FERRULE Long Cabinet Pull · Natural Brass · 416 mm C-C.
- Drawers and lower doors: FERRULE Cabinet Pull · Natural Brass · 192 mm C-C.
Compare an eligible sample beside the wood and stone before specifying the room.