Small Changes

A Painted Bathroom Vanity with Brass Cabinet Pulls

Red-brown paint gives this old bathroom vanity a deeper color, while natural brass brings a warm highlight to the doors and drawer. The ivory sink and cream tile still frame the room. The same three-piece faucet appears in a brass finish in the after image, carrying that warmth up to the countertop.

AI-generated makeover concept. The images illustrate a paint, hardware, and faucet-finish change.

Cream bathroom vanity with dark pulls, an ivory sink, and a chrome faucet
Before · Cream paint, dark pulls, and a chrome faucet.
Red-brown bathroom vanity with natural brass TIER pulls and a matching three-piece faucet
After · Red-brown paint, natural brass pulls, and a coordinating faucet.

How the brass is placed

Two TIER Stepped Cabinet Pulls sit vertically near the meeting edges of the doors. A third runs horizontally across the lower drawer. Each pull repeats the flared ends and stepped round bases, so the hardware reads as one set across all three fronts. The compact round bases also leave room for the recessed panels and trim.

Natural brass TIER pull with flared tips and stepped circular mounting bases
TIER in Natural Brass. The angled product view shows the flared ends and stepped bases.

Which measurement matters when replacing a pull?

Measure from the center of one mounting hole to the center of the other after removing the old hardware. In this concept, all three pulls use 128 mm center-to-center (5.04 in.). The same TIER size measures 200 mm (7.87 in.) overall. Use the first number to match the holes and the second to check how far the ends extend across the face.

On a framed door, check the width of the flat mounting area and open the door to check clearance before ordering. The Size & Placement Guide shows where to measure and how to plan a replacement.