TUCK Flat Bar Long Pull in Matte Black, 320 mm center-to-center hole spacing, front view. Solid brass.

TUCK Flat Bar Long Pull

Matte Black / 320mm C-C
€52,95
Skip to product information
TUCK Flat Bar Long Pull in Matte Black, 320 mm center-to-center hole spacing, front view. Solid brass.

TUCK Flat Bar Long Pull

€52,95
Finish
Size

Size is measured center-to-center (C-C), not overall length. View the size guide →

Quantity · Sold individually

Delivery
Normally prepared in 1–3 business days. Transit depends on destination; contact us for a current estimate before ordering.
Shipping
US$9.95 below US$150; free standard shipping from US$150 after product discounts. Local-currency equivalent shown at checkout.
Fit & installation

Match the center-to-center hole spacing. Check overall length, projection and clearance before drilling.

Standard 25 mm screws are included. Measure the total panel thickness at the fixing point. For thicker or double-panel fronts, contact us to confirm screw length.

Installation guide Ask about fit
Returns 14-day cancellation rights; additional eligible 30-day returns

Eligible UK and EU consumers may cancel or withdraw within 14 days of receiving the goods, or the last delivery of an order supplied in parts. Additional voluntary 30-day returns apply to eligible items. Customers normally pay return postage to our United States address. Statutory rights take precedence.

Shipping & returns policy
Samples How to order

For an eligible in-stock sample, add one piece in the finish and size you want to compare. You can use Special instructions in the cart to identify your sample items.

The Design Sample Credit programme currently serves the US, Canada and Australia. For a UK or EU project, contact us for finish and sizing advice before ordering samples.

Sample options & credit terms

Product safety contacts

Manufacturer
OBJECTTONE LLC
30 N Gould St Ste N
Sheridan, WY 82801
United States
hello@objecttone.com
EU responsible person
Kodelix Consulting Osaühing
Tartu mnt 67/1-13b, Kesklinna
10115 Tallinn, Harju County
Estonia
info@kodelix.org

For returns, contact hello@objecttone.com first. The EU responsible person does not accept returns.

Solid brass · Statutory consumer rights

TUCK is a long solid brass cabinet pull with a flat bar and smoothly rounded returns. Choose 320 or 416 mm center-to-center hole spacing and compare the overall length for tall cabinet doors. Four finishes are available in the selector.

Design details

  • Use: Tall cabinet, pantry and furniture doors
  • Material: Solid brass
  • Country of origin: China
  • Finish: Natural Brass, Antique Brass, Matte Black, Brushed Nickel. Select the required finish and size in the variant selector; availability varies by variant.

Design & cabinet styling

The long flat bar carries a restrained line across a tall cabinet or pantry door. The rounded returns soften its ends. Compare the selected size against the door proportions and the space needed for your hand.

Measurements

Measurements are shown in millimetres and inches. Select the exact size and finish above before ordering.

Selected size Overall Projection Weight
320 mm C-C (12.60") 326.5 mm (12.85") 28 mm (1.10") 190 g
416 mm C-C (16.38") 422.5 mm (16.63") 28 mm (1.10") 240 g

Grip & cross-section

  • Bar width: 10 mm (0.39 in)
  • Bar thickness: 6.5 mm (0.26 in)

Using the size comparison

The selected-finish comparison places the 320 and 416 mm C-C pulls together. Use the separate overall lengths and projection to check cabinet clearances; the image is a visual selection aid.

Selection questions

Which dimension should I match when replacing a long pull?

Match the center-to-center distance between existing mounting holes: 320 or 416 mm for this product. Overall length is a separate dimension and extends beyond the mounting centers.

Can one pull bridge the gap between two cabinet doors?

No. Both fixing points for one pull belong on the same door or panel. Use one independently mounted pull on each door and check clearances before drilling.

Installation & care

Installation — two-hole pulls

For replacements, match the center-to-center (C-C) distance between the existing screw holes; this is different from overall length. Check panel thickness and clearance before drilling. Hold the pull outside the cabinet front and insert both screws from inside. Start the threads by hand, align the pull and tighten evenly with a hand screwdriver. Do not overtighten.

Mounting screws

Standard 25 mm mounting screws are included. Measure the total panel thickness at the fixing point, including any applied or double-panel layers. If you need a different screw length, add the total thickness to your order notes or contact us before ordering so we can confirm the appropriate option.

Care

Wipe with a clean, soft cloth. For marks, use a lightly dampened cloth with mild soap, remove any residue and dry thoroughly. Avoid abrasive pads, metal polish and harsh cleaners. Do not leave moisture or cleaner on the hardware.

Coordinate the collection

Compare the separate dimensions and fixing positions of the TUCK Flat Bar Cabinet Pull.

Project support

For project support, send the product name, finish, size, quantity, project location and target order date. Include panel thickness and existing hole spacing for replacements. Contact our team or explore the Trade program.

Warranty & Support

Statutory consumer rights apply to UK and EU purchases. Our voluntary 10-year limited mechanical warranty currently covers the US, Canada and Australia only, under its published territorial terms. Contact us if you need help with a product. Warranty terms and regional eligibility · Ask about fit

For orders to the United Kingdom and European Union: under its current territorial terms, the voluntary 10-year mechanical warranty is limited to the United States, Canada and Australia. Your statutory consumer rights remain unaffected. Contact us for help with a product issue.