Room Edits

Choosing Natural Brass Pulls for a Walnut Kitchen

Natural brass gives walnut cabinetry a warm highlight. In this kitchen, pale stone and warm white surfaces leave the walnut grain visible, while FERRULE’s small collars repeat across the doors and drawers. The finish stays consistent as the hardware changes length.

AI-generated styling concept.

Walnut kitchen with natural brass FERRULE pulls on tall cabinets, lower doors, and drawers
Natural brass against walnut cabinetry, pale stone, and warm white walls.

Where to use a long pull

The full-height cabinet doors each carry a vertical FERRULE Long Cabinet Pull. Its 416 mm (16.38 in.) center-to-center spacing and 500 mm (19.69 in.) overall length give the tall fronts a longer line to follow. Place the handle where it is comfortable to reach and check its clearance next to adjacent doors.

Pair of vertical FERRULE long pulls on walnut cabinet doors, with their collars and tapered supports visible
The long pull repeats the same collar and tapered support details on the tall doors.

How to size drawers and lower doors

The lower cabinet fronts use the FERRULE Collared Cabinet Pull at 192 mm (7.56 in.) center-to-center and 234 mm (9.21 in.) overall. The pulls run horizontally on the drawers and vertically on the lower doors. This keeps the hardware in proportion to the smaller fronts while repeating the same finish and shape.

What to measure before ordering

For existing two-hole hardware, measure between the hole centers and choose the matching size. For a new installation, mark the pull’s full length on the front with painter’s tape and check that the supports land on a flat area. Use the Size & Placement Guide to compare mounting spacing, overall length, and projection.

Hardware in this concept

Compare an eligible sample beside the wood and stone before specifying the room.