RHYTHM Wave Cabinet Pull in Matte Black, 96 mm center-to-center hole spacing, front view. Solid brass.

RHYTHM Wave Cabinet Pull

Matte Black / 96mm C-C
£31.00
Skip to product information
RHYTHM Wave Cabinet Pull in Matte Black, 96 mm center-to-center hole spacing, front view. Solid brass.

RHYTHM Wave Cabinet Pull

£31.00
Finish
Size

Size is measured center-to-center (C-C), not overall length. View the size guide →

Quantity · Sold individually

Delivery
Normally prepared in 1–3 business days. Transit depends on destination; contact us for a current estimate before ordering.
Shipping
US$9.95 below US$150; free standard shipping from US$150 after product discounts. Local-currency equivalent shown at checkout.
Fit & installation

Match the center-to-center hole spacing. Check overall length, projection and clearance before drilling.

Standard 25 mm screws are included. Measure the total panel thickness at the fixing point. For thicker or double-panel fronts, contact us to confirm screw length.

Installation guide Ask about fit
Returns 14-day cancellation rights; additional eligible 30-day returns

Eligible UK and EU consumers may cancel or withdraw within 14 days of receiving the goods, or the last delivery of an order supplied in parts. Additional voluntary 30-day returns apply to eligible items. Customers normally pay return postage to our United States address. Statutory rights take precedence.

Shipping & returns policy
Samples How to order

For an eligible in-stock sample, add one piece in the finish and size you want to compare. You can use Special instructions in the cart to identify your sample items.

The Design Sample Credit programme currently serves the US, Canada and Australia. For a UK or EU project, contact us for finish and sizing advice before ordering samples.

Sample options & credit terms

Solid brass · Statutory consumer rights

RHYTHM is a solid brass cabinet pull with a continuous wave profile. It uses two mounting holes and comes in 96, 128, 160 and 192 mm centre-to-centre sizes. Choose Natural Brass, Antique Brass or Matte Black, and match the hole spacing before selecting the overall look.

Design details

  • Use: Cabinet doors, drawers and furniture
  • Material: Solid brass
  • Country of origin: China
  • Finish: Natural Brass, Antique Brass, Matte Black. Select the required finish and size in the variant selector; availability varies by variant.

Design & cabinet styling

The wave profile introduces a curved line against straight cabinet edges and moldings. The selected-finish gallery shows styling combinations, including vertical door and horizontal drawer arrangements. Scenes illustrate a design combination; use the specification table for the size you select.

Measurements

Measurements are shown in millimetres and inches. Select the exact size and finish above before ordering.

Selected size Overall Projection Width / diameter Weight
96 mm C-C (3.78") 119 mm (4.69") 25 mm (0.98") 20 mm (0.79") 96 g
128 mm C-C (5.04") 152 mm (5.98") 25 mm (0.98") 23 mm (0.91") 128 g
160 mm C-C (6.30") 193 mm (7.60") 25 mm (0.98") 26 mm (1.02") 170 g
192 mm C-C (7.56") 234 mm (9.21") 25 mm (0.98") 30 mm (1.18") 223 g

Using the size comparison

The selected-finish size comparison shows how the wave changes across the four C-C options. Face width also changes by size. Use the measurements for the exact selected variant; cabinet scenes are styling references.

Selection questions

Will a 128 mm pull fit existing 5-inch holes?

A 128 mm hole spacing is approximately 5.04 inches. It is not the same as 5 inches, which equals 127 mm. Measure between existing hole centers and match that spacing before ordering.

Do the scenes show every selected size?

No. Scenes provide styling references within a finish. Review the product views and measurements for your selected size rather than using a scene to measure the hardware.

Does the wave profile have the same width in every size?

No. The face widths are 20, 23, 26 and 30 mm for the 96, 128, 160 and 192 mm C-C sizes respectively. Projection stays 25 mm. Compare each selected-size product view and the measurement table when choosing visual scale.

Installation & care

Installation — two-hole pulls

For replacements, match the centre-to-centre (C-C) distance between the existing screw holes; this is different from overall length. Check panel thickness and clearance before drilling. Hold the pull outside the cabinet front and insert both screws from inside. Start the threads by hand, align the pull and tighten evenly with a hand screwdriver. Do not overtighten.

Mounting screws

Standard 25 mm mounting screws are included. Measure the total panel thickness at the fixing point, including any applied or double-panel layers. If you need a different screw length, add the total thickness to your order notes or contact us before ordering so we can confirm the appropriate option.

Care

Wipe with a clean, soft cloth. For marks, use a lightly dampened cloth with mild soap, remove any residue and dry thoroughly. Avoid abrasive pads, metal polish and harsh cleaners. Do not leave moisture or cleaner on the hardware.

Project support

For project support, send the product name, finish, size, quantity, project location and target order date. Include panel thickness and existing hole spacing for replacements. Contact our team or explore the Trade program.

Warranty & Support

Statutory consumer rights apply to UK and EU purchases. Our voluntary 10-year limited mechanical warranty currently covers the US, Canada and Australia only, under its published territorial terms. Contact us if you need help with a product. Warranty terms and regional eligibility · Ask about fit

For orders to the United Kingdom and European Union: under its current territorial terms, the voluntary 10-year mechanical warranty is limited to the United States, Canada and Australia. Your statutory consumer rights remain unaffected. Contact us for help with a product issue.