SCORE Ribbed Cabinet Pull
Size is measured center-to-center (C-C), not overall length. View the size guide →
- Delivery
- Normally prepared in 1–3 business days. Transit depends on destination; contact us for a current estimate before ordering.
- Shipping
- US$9.95 below US$150; free standard shipping from US$150 after product discounts. Local-currency equivalent shown at checkout.
Fit & installation
Match the center-to-center hole spacing. Check overall length, projection and clearance before drilling.
Standard 25 mm screws are included. Measure the total panel thickness at the fixing point. For thicker or double-panel fronts, contact us to confirm screw length.
Installation guide Ask about fitReturns 14-day cancellation rights; additional eligible 30-day returns
Eligible UK and EU consumers may cancel or withdraw within 14 days of receiving the goods, or the last delivery of an order supplied in parts. Additional voluntary 30-day returns apply to eligible items. Customers normally pay return postage to our United States address. Statutory rights take precedence.
Shipping & returns policySamples How to order
For an eligible in-stock sample, add one piece in the finish and size you want to compare. You can use Special instructions in the cart to identify your sample items.
The Design Sample Credit programme currently serves the US, Canada and Australia. For a UK or EU project, contact us for finish and sizing advice before ordering samples.
Sample options & credit termsSolid brass · Statutory consumer rights
SCORE is a solid brass cabinet pull with a ribbed grip and smooth end sections. It uses two mounting holes and is available in the hole spacings and finishes shown above. Match the C-C distance first, then check the overall length and projection.
Design details
- Use: Cabinet doors, drawers and furniture
- Material: Solid brass
- Country of origin: China
- Finish: Natural Brass, Antique Brass. Select the required finish and size in the variant selector; availability varies by variant.
Design & cabinet styling
The change from ribbed to smooth metal gives the bar a clear tactile rhythm. Quiet flat or framed cabinet fronts allow the grip detail to stand out without competing with another strong surface pattern.
Measurements
Measurements are shown in millimetres and inches. Select the exact size and finish above before ordering.
| Selected size | Overall | Projection | Weight |
|---|---|---|---|
| 96 mm C-C (3.78") | 132 mm (5.20") | 30 mm (1.18") | 122 g |
| 128 mm C-C (5.04") | 164 mm (6.46") | 30 mm (1.18") | 152 g |
| 160 mm C-C (6.30") | 196 mm (7.72") | 30 mm (1.18") | 182 g |
| 224 mm C-C (8.82") | 260 mm (10.24") | 30 mm (1.18") | 242 g |
| 256 mm C-C (10.08") | 292 mm (11.50") | 30 mm (1.18") | 272 g |
| 320 mm C-C (12.60") | 356 mm (14.02") | 30 mm (1.18") | 332 g |
Grip & cross-section
- Ribbed grip diameter: 12 mm (0.47 in)
- Smooth end diameter: 10 mm (0.39 in)
Using the size comparison
The SCORE size comparison for the selected finish places its available lengths together. C-C labels describe mounting-hole center spacing, not overall length. Use the measurement table for the exact selected variant; the comparison is a visual selection aid.
Selection questions
Where is the ribbed detail?
The ribbing runs through the grip section, contrasting with the smooth ends. It is a different pattern from the deeper fluting of PLEAT.
How do I replace an existing pull?
Measure between the centers of the existing fixing holes and select the same C-C spacing. Overall length alone does not identify a replacement size.
Installation & care
Installation — two-hole pulls
For replacements, match the centre-to-centre (C-C) distance between the existing screw holes; this is different from overall length. Check panel thickness and clearance before drilling. Hold the pull outside the cabinet front and insert both screws from inside. Start the threads by hand, align the pull and tighten evenly with a hand screwdriver. Do not overtighten.
Mounting screws
Standard 25 mm mounting screws are included. Measure the total panel thickness at the fixing point, including any applied or double-panel layers. If you need a different screw length, add the total thickness to your order notes or contact us before ordering so we can confirm the appropriate option.
Care
Wipe with a clean, soft cloth. For marks, use a lightly dampened cloth with mild soap, remove any residue and dry thoroughly. Avoid abrasive pads, metal polish and harsh cleaners. Do not leave moisture or cleaner on the hardware.
Coordinate the collection
Compare the individual dimensions and fixing formats of other SCORE designs.
Project support
For project support, send the product name, finish, size, quantity, project location and target order date. Include panel thickness and existing hole spacing for replacements. Contact our team or explore the Trade program.
Warranty & Support
Statutory consumer rights apply to UK and EU purchases. Our voluntary 10-year limited mechanical warranty currently covers the US, Canada and Australia only, under its published territorial terms. Contact us if you need help with a product. Warranty terms and regional eligibility · Ask about fit
For orders to the United Kingdom and European Union: under its current territorial terms, the voluntary 10-year mechanical warranty is limited to the United States, Canada and Australia. Your statutory consumer rights remain unaffected. Contact us for help with a product issue.
Complete the room.
Matching hardware from the same design family.