Small Changes
A Painted Bathroom Vanity with Brass Cabinet Pulls
Red-brown paint gives this old bathroom vanity a deeper color, while natural brass brings a warm highlight to the doors and drawer. The ivory sink and cream tile still frame the room. The same three-piece faucet appears in a brass finish in the after image, carrying that warmth up to the countertop.
AI-generated makeover concept. The images illustrate a paint, hardware, and faucet-finish change.


How the brass is placed
Two TIER Stepped Cabinet Pulls sit vertically near the meeting edges of the doors. A third runs horizontally across the lower drawer. Each pull repeats the flared ends and stepped round bases, so the hardware reads as one set across all three fronts. The compact round bases also leave room for the recessed panels and trim.

Which measurement matters when replacing a pull?
Measure from the center of one mounting hole to the center of the other after removing the old hardware. In this concept, all three pulls use 128 mm center-to-center (5.04 in.). The same TIER size measures 200 mm (7.87 in.) overall. Use the first number to match the holes and the second to check how far the ends extend across the face.
On a framed door, check the width of the flat mounting area and open the door to check clearance before ordering. The Size & Placement Guide shows where to measure and how to plan a replacement.