CABINET HARDWARE ANSWERS
Direct guidance on solid brass cabinet hardware, finishes, sizing, installation, care, samples, shipping, returns, warranty and project support for customers in the United States, Canada and Australia.
For product-specific help, send the item name, finish, measurements, panel thickness and a clear photograph before ordering or drilling.
SOLID BRASS HARDWARE
MEASUREMENTS IN MM + IN
SIZE, CARE, DELIVERY & WARRANTY
MATERIALS & FINISHES
Start with material, finish availability and the relationship between the hardware and the room. Product-specific details always take priority over general guidance.
Yes. OBJECT & TONE cabinet pulls, knobs, T-bars and their visible bases are made from solid brass. The individual product page lists the configuration, dimensions, net weight, finish options and included mounting hardware for that item. Review those details before ordering because size and finish availability vary across the collection.
Solid brass gives a small working object substance in the hand and supports crisp profiles, textured grips and durable everyday function. Material alone does not determine suitability, however. The product's size, projection, mounting method, finish and intended indoor application should all be checked against the cabinet and the way it will be used.
Current finish names are Natural Brass, Antique Brass, Matte Black and Brushed Nickel. Select CHROMA designs also offer Matte White, Klein Blue, Vermilion Red and Van Gogh Yellow. Brushed Nickel is offered on selected SPAN and TUCK pulls. Not every finish is available on every product or size; use the selected variant to confirm availability.
Natural Brass is the brighter and clearer brass expression, creating a warmer visible highlight on cabinetry. Antique Brass is deeper and more subdued, so it often feels integrated with walnut, oak, putty colors and saturated paint. The same finish can read differently in daylight and artificial light, so compare an eligible sample in the room before a larger order.
Not necessarily. Photography, screen calibration, brightness, daylight, bulb temperature and nearby surfaces can all shift perceived color. Online images are useful for narrowing the options, but a physical sample provides a more reliable comparison when the finish must coordinate closely with cabinet paint, timber, stone, tile or nearby metalwork.
Yes. A coherent room does not require every metal finish to match. Choose one dominant finish, then repeat a supporting finish in at least one other element so the relationship feels intentional. Warm brass and black create clear contrast; stainless appliances can often operate as a neutral while the cabinet hardware establishes the room's warmer or darker direction.
The collection is intended for normal indoor cabinetry and furniture, including kitchens, bathroom vanities, wardrobes, built-ins and casegoods. Confirm dimensions, panel thickness, clearance and room conditions before ordering. In areas exposed to splashes or higher humidity, wipe the hardware dry and do not allow water or cleaning products to remain on the surface.
SIZING & FIT
Center-to-center spacing determines whether a two-hole pull fits existing holes. Overall length, projection, base diameter and grip determine how it looks and functions.
Center-to-center is the distance from the center of one mounting hole to the center of the other. It applies to two-hole pulls and is the critical measurement when replacing existing hardware. It is not the pull's overall length. OBJECT & TONE lists dimensions in millimeters and uses inch equivalents where helpful for North American projects.
No. Center-to-center describes the mounting-hole spacing. Overall length measures the hardware from one end to the other. A 128 mm C-C pull will normally be longer than 128 mm overall. Match center-to-center when reusing holes, then review overall length, projection and base dimensions to confirm scale, coverage and clearance.
Projection is how far the installed hardware extends from the cabinet face. It affects finger clearance, grip and whether the piece interferes with adjacent doors, trim, countertops or appliances. Compare the listed projection with the cabinet construction and nearby elements, especially on corner cabinets, pocket areas and fronts close to walls.
Remove one existing pull and measure from the center of one screw hole to the center of the other. Choose the same C-C size whenever possible to reuse the holes. Then confirm the new pull's overall length and base diameter will cover any marks or impressions left by the previous hardware. Measure more than one front before ordering a full quantity.
There is no single ratio that works for every cabinet. For replacements, begin with the existing C-C spacing. For new cabinetry, compare two or more lengths against the actual door or drawer with a paper template or low-tack tape. Judge visual proportion, reach, grip, projection and nearby obstructions before the cabinet is drilled.
Knobs and T-bars give doors and smaller drawers a compact one-hole grip. Cabinet pulls provide a longer grip for frequently used doors and drawers. Long pulls create leverage and a stronger line on tall doors, wide drawers and selected appliance panels. A coordinated collection lets you combine types while keeping the profile and finish consistent.
Not necessarily. Using one size can create a quiet, consistent rhythm, while using related sizes can better suit very different drawer and door widths. Keep the logic simple: limit the number of sizes, repeat each size intentionally and use one collection or closely related profiles so the room does not feel fragmented.
Many cabinet hardware standards are specified in millimeters, including common C-C spacings such as 96, 128, 160 and 192 mm. We use millimeters as the primary technical dimension and provide inch equivalents where useful. When matching existing holes, measure the actual center-to-center distance rather than relying on a rounded inch description.
INSTALLATION
A template, accurate measurements and the correct screw length protect both the cabinet and the hardware. Final installation should be confirmed for the specific cabinet construction.
Yes. Standard 25 mm mounting screws are included for typical single-panel cabinet doors and drawer fronts. Double-panel or unusually thick fronts may need longer screws. Measure the panel thickness before installation and add a note to the order when additional screw length may be required.
Measure the full thickness the screw must pass through, including any drawer box or applied front. The included 25 mm screw is intended for typical single-panel construction and may not fit a double-panel front. Send the product name, panel thickness and a clear photograph before ordering if you are unsure about the required length.
Confirm the exact product and variant, C-C spacing, overall dimensions, projection, panel thickness, placement and clearance from edges and adjacent fronts. Mark the position with a template, check alignment from normal viewing height and test the grip. On paired doors or a bank of drawers, use the same reference edge for every mark.
Create a paper outline or use low-tack painter's tape to mark the overall length and mounting centers on the cabinet. View it from across the room, then test reach and clearance at normal standing height. This mock-up does not replace accurate drilling measurements, but it helps resolve scale and position before a permanent decision.
A careful homeowner may be comfortable replacing hardware in matching existing holes. New drilling, valuable cabinetry, double-panel fronts and long pulls require more precision. Use an experienced cabinet installer when the construction, alignment or drilling method is uncertain. OBJECT & TONE can explain product dimensions, but the installer must confirm suitability for the specific cabinet.
Tighten until the hardware sits securely and does not rotate, but do not over-tighten. Excessive force can mark the cabinet, damage threads or place stress on the mounting point. Tighten evenly by hand and recheck alignment as the piece seats against the front. If the screw bottoms out before the hardware is secure, stop and confirm the required length.
CARE & FINISH BEHAVIOR
Routine care should preserve the intended appearance rather than trying to refinish it. Avoid aggressive products unless specific instructions for that item say otherwise.
Use a soft cloth with warm water and mild soap when needed, then dry thoroughly with a clean soft cloth. Apply cleaner to the cloth rather than spraying the hardware or cabinet directly. Regular gentle wiping is preferable to infrequent aggressive cleaning.
Avoid abrasive pads, scouring tools, rough towels, bleach, acids, solvents, harsh multipurpose sprays and strongly alkaline cleaners. These can scratch, discolor or alter the intended surface. Do not let cleaner collect around the base or remain on the cabinet. If an accidental spill occurs, wipe with clean water and dry promptly.
No. Do not use metal polish unless the instructions for a specific product explicitly say otherwise. Polishing compounds can change color or sheen, remove surface treatment and create an uneven result between high-touch and low-touch areas. Use the general soft-cloth, mild-soap and thorough-drying method instead.
Use the same gentle cleaning method and wipe away water, toothpaste, skincare products and household cleaners promptly. Do not allow moisture or chemicals to sit around the base or on the cabinet surface. Room ventilation and frequency of use affect appearance, so inspect higher-touch bathroom hardware regularly and dry it after splashes.
Normal wear and changes in appearance can occur through touch, moisture, cleaning and the surrounding environment. We do not describe every finish as a living finish or promise identical behavior across products. Gentle care helps reduce avoidable damage. The 10-year limited warranty covers qualifying mechanical defects, not a guarantee that finish appearance remains unchanged.
ORDERING & SUPPORT
Use samples and planning guides for finish and size decisions, then confirm every variant and quantity before checkout.
Eligible samples help compare finish, texture and scale in the room. The Design Sample Credit program is available in the United States, Canada and Australia, with credit equal to eligible sample merchandise paid, up to US$50, toward one qualifying retail order of at least US$250 within 60 days after credit issuance. Sample purchases are final sale for voluntary change-of-mind returns. Review full eligibility and terms on the Samples page.
Finish and size availability varies by collection and hardware type. If a combination does not appear in the selector, do not assume it can be ordered in that configuration. Use the product page as the current source of truth and contact us before ordering if a project depends on a specific combination.
Create a door-and-drawer schedule and count each mounting location by hardware type, finish and size. Separate paired doors, drawers, tall doors and any appliance panels. Verify the total against the cabinet drawings, then review every cart variant before checkout. Keep the schedule with the order so installers can match each piece to its intended location.
Eligible change-of-mind returns may be requested within 30 days of delivery. Items must be uninstalled, unused, unmarked, unmodified and returned with original protective packaging, mounting hardware and accessories. Exclusions and return-postage terms apply, so read the current Shipping & Returns policy before ordering or installing.
We ship to the United States, Canada and Australia. Orders are normally processed within 1–3 business days, followed by estimated standard transit of 5–8 business days: approximately 6–11 business days in total. Orders ship directly from China using a duty-paid delivery service. Standard shipping is US$9.95 below US$150, and free for an eligible merchandise subtotal of US$150 or more. The applicable local-currency amount and any legally collected tax are shown at checkout. Delivery estimates are not guaranteed; read the current Shipping Policy.
Eligible OBJECT & TONE cabinet hardware is covered by a 10-year limited mechanical warranty for manufacturing and mechanical defects under normal indoor residential use. Normal wear, finish changes, misuse, incorrect installation, unsuitable cleaning and third-party labor are not the same as a qualifying mechanical defect. Review the full policy and claim process.
Use the Contact page and provide the order number, affected product and finish, a clear description of the issue and photographs showing the full installation and the specific concern. Additional measurements or information may be requested. Do not remove or alter the affected piece unless needed for safety before receiving guidance.
Yes. The Trade Program is intended for qualified design and building professionals who need support with product selection, finish coordination, quantities and project planning. Submit the inquiry with business information, project type, approximate quantity and timing. Trade access, benefits and project pricing are subject to qualification and review.
Send the product or collection name, finish, quantity, cabinet or drawer dimensions, panel thickness, existing C-C spacing and clear photographs. For new cabinetry, include the intended placement and nearby trim, doors, countertops or appliances that could affect clearance. Accurate context makes size and finish guidance more useful.
QUICK GLOSSARY
Center-to-center (C-C) is the distance between mounting-hole centers. Overall length is the end-to-end dimension. Projection is the distance the hardware extends from the cabinet face. Base diameter or width is the footprint that meets the cabinet surface.
BEFORE YOU ORDER
CONTINUE READING
Use the Finish Guide for room-level finish comparison, the Size & Placement Guide for measurements and mock-ups, Care & Installation for routine cleaning and mounting preparation, and Shipping & Returns for current delivery and return terms.
For a product-specific question, contact us before ordering or drilling.