RHYTHM Wave Cabinet Pull
RHYTHM Wave Cabinet Pull
Size is measured center-to-center (C-C), not overall length. View the size guide →
Solid brass · Mounting screws included · 10-year limited mechanical warranty
RHYTHM is a solid brass cabinet pull with a continuous wave profile. It uses two mounting holes and comes in 96, 128, 160 and 192 mm center-to-center sizes. Choose Natural Brass, Antique Brass or Matte Black, and match the hole spacing before selecting the overall look.
Design details
- Use: Cabinet doors, drawers and furniture
- Material: Solid brass
- Country of origin: China
- Finish: Natural Brass, Antique Brass, Matte Black. Select the required finish and size in the variant selector; availability varies by variant.
Design & cabinet styling
The wave profile introduces a curved line against straight cabinet edges and moldings. The selected-finish gallery shows styling combinations, including vertical door and horizontal drawer arrangements. Scenes illustrate a design combination; use the specification table for the size you select.
Measurements
Measurements are shown in millimetres and inches. Select the exact size and finish above before ordering.
| Selected size | Overall | Projection | Width / diameter | Weight |
|---|---|---|---|---|
| 96 mm C-C (3.78") | 119 mm (4.69") | 25 mm (0.98") | 20 mm (0.79") | 96 g |
| 128 mm C-C (5.04") | 152 mm (5.98") | 25 mm (0.98") | 23 mm (0.91") | 128 g |
| 160 mm C-C (6.30") | 193 mm (7.60") | 25 mm (0.98") | 26 mm (1.02") | 170 g |
| 192 mm C-C (7.56") | 234 mm (9.21") | 25 mm (0.98") | 30 mm (1.18") | 223 g |
Using the size comparison
The selected-finish size comparison shows how the wave changes across the four C-C options. Face width also changes by size. Use the measurements for the exact selected variant; cabinet scenes are styling references.
Selection questions
Will a 128 mm pull fit existing 5-inch holes?
A 128 mm hole spacing is approximately 5.04 inches. It is not the same as 5 inches, which equals 127 mm. Measure between existing hole centers and match that spacing before ordering.
Do the scenes show every selected size?
No. Scenes provide styling references within a finish. Review the product views and measurements for your selected size rather than using a scene to measure the hardware.
Does the wave profile have the same width in every size?
No. The face widths are 20, 23, 26 and 30 mm for the 96, 128, 160 and 192 mm C-C sizes respectively. Projection stays 25 mm. Compare each selected-size product view and the measurement table when choosing visual scale.
Installation & care
Installation — two-hole pulls
For replacements, match the center-to-center (C-C) distance between the existing screw holes; this is different from overall length. Check panel thickness and clearance before drilling. Hold the pull outside the cabinet front and insert both screws from inside. Start the threads by hand, align the pull and tighten evenly with a hand screwdriver. Do not overtighten.
Mounting screws
Standard 25 mm mounting screws are included. Measure the total panel thickness at the fixing point, including any applied or double-panel layers. If you need a different screw length, add the total thickness to your order notes or contact us before ordering so we can confirm the appropriate option.
Care
Wipe with a clean, soft cloth. For marks, use a lightly dampened cloth with mild soap, remove any residue and dry thoroughly. Avoid abrasive pads, metal polish and harsh cleaners. Do not leave moisture or cleaner on the hardware.
Project support
For project support, send the product name, finish, size, quantity, project location and target order date. Include panel thickness and existing hole spacing for replacements. Contact our team or explore the Trade program.
Warranty & Support
Covered by OBJECT & TONE's 10-Year Limited Mechanical Warranty for manufacturing and mechanical defects under normal indoor residential use. For planning and support, see our Hardware Guides, Finish Guide, Care & Installation, Shipping & Returns, or Contact.