SCORE Ribbed Cabinet Pull
SCORE Ribbed Cabinet Pull
Size is measured center-to-center (C-C), not overall length. View the size guide →
Solid brass · Mounting screws included · 10-year limited mechanical warranty
SCORE is a solid brass cabinet pull with a ribbed grip and smooth end sections. It uses two mounting holes and is available in the hole spacings and finishes shown above. Match the C-C distance first, then check the overall length and projection.
Design details
- Use: Cabinet doors, drawers and furniture
- Material: Solid brass
- Country of origin: China
- Finish: Natural Brass, Antique Brass. Select the required finish and size in the variant selector; availability varies by variant.
Design & cabinet styling
The change from ribbed to smooth metal gives the bar a clear tactile rhythm. Quiet flat or framed cabinet fronts allow the grip detail to stand out without competing with another strong surface pattern.
Measurements
Measurements are shown in millimetres and inches. Select the exact size and finish above before ordering.
| Selected size | Overall | Projection | Weight |
|---|---|---|---|
| 96 mm C-C (3.78") | 132 mm (5.20") | 30 mm (1.18") | 122 g |
| 128 mm C-C (5.04") | 164 mm (6.46") | 30 mm (1.18") | 152 g |
| 160 mm C-C (6.30") | 196 mm (7.72") | 30 mm (1.18") | 182 g |
| 224 mm C-C (8.82") | 260 mm (10.24") | 30 mm (1.18") | 242 g |
| 256 mm C-C (10.08") | 292 mm (11.50") | 30 mm (1.18") | 272 g |
| 320 mm C-C (12.60") | 356 mm (14.02") | 30 mm (1.18") | 332 g |
Grip & cross-section
- Ribbed grip diameter: 12 mm (0.47 in)
- Smooth end diameter: 10 mm (0.39 in)
Using the size comparison
The SCORE size comparison for the selected finish places its available lengths together. C-C labels describe mounting-hole center spacing, not overall length. Use the measurement table for the exact selected variant; the comparison is a visual selection aid.
Selection questions
Where is the ribbed detail?
The ribbing runs through the grip section, contrasting with the smooth ends. It is a different pattern from the deeper fluting of PLEAT.
How do I replace an existing pull?
Measure between the centers of the existing fixing holes and select the same C-C spacing. Overall length alone does not identify a replacement size.
Installation & care
Installation — two-hole pulls
For replacements, match the center-to-center (C-C) distance between the existing screw holes; this is different from overall length. Check panel thickness and clearance before drilling. Hold the pull outside the cabinet front and insert both screws from inside. Start the threads by hand, align the pull and tighten evenly with a hand screwdriver. Do not overtighten.
Mounting screws
Standard 25 mm mounting screws are included. Measure the total panel thickness at the fixing point, including any applied or double-panel layers. If you need a different screw length, add the total thickness to your order notes or contact us before ordering so we can confirm the appropriate option.
Care
Wipe with a clean, soft cloth. For marks, use a lightly dampened cloth with mild soap, remove any residue and dry thoroughly. Avoid abrasive pads, metal polish and harsh cleaners. Do not leave moisture or cleaner on the hardware.
Coordinate the collection
Compare the individual dimensions and fixing formats of other SCORE designs.
Project support
For project support, send the product name, finish, size, quantity, project location and target order date. Include panel thickness and existing hole spacing for replacements. Contact our team or explore the Trade program.
Warranty & Support
Covered by OBJECT & TONE's 10-Year Limited Mechanical Warranty for manufacturing and mechanical defects under normal indoor residential use. For planning and support, see our Hardware Guides, Finish Guide, Care & Installation, Shipping & Returns, or Contact.
Complete the room.
Matching hardware from the same design family.
