TUCK Flat Bar Long Pull
TUCK Flat Bar Long Pull
Size is measured center-to-center (C-C), not overall length. View the size guide →
Solid brass · Mounting screws included · 10-year limited mechanical warranty
TUCK is a long solid brass cabinet pull with a flat bar and smoothly rounded returns. Choose 320 or 416 mm center-to-center hole spacing and compare the overall length for tall cabinet doors. Four finishes are available in the selector.
Design details
- Use: Tall cabinet, pantry and furniture doors
- Material: Solid brass
- Country of origin: China
- Finish: Natural Brass, Antique Brass, Matte Black, Brushed Nickel. Select the required finish and size in the variant selector; availability varies by variant.
Design & cabinet styling
The long flat bar carries a restrained line across a tall cabinet or pantry door. The rounded returns soften its ends. Compare the selected size against the door proportions and the space needed for your hand.
Measurements
Measurements are shown in millimetres and inches. Select the exact size and finish above before ordering.
| Selected size | Overall | Projection | Weight |
|---|---|---|---|
| 320 mm C-C (12.60") | 326.5 mm (12.85") | 28 mm (1.10") | 190 g |
| 416 mm C-C (16.38") | 422.5 mm (16.63") | 28 mm (1.10") | 240 g |
Grip & cross-section
- Bar width: 10 mm (0.39 in)
- Bar thickness: 6.5 mm (0.26 in)
Using the size comparison
The selected-finish comparison places the 320 and 416 mm C-C pulls together. Use the separate overall lengths and projection to check cabinet clearances; the image is a visual selection aid.
Selection questions
Which dimension should I match when replacing a long pull?
Match the center-to-center distance between existing mounting holes: 320 or 416 mm for this product. Overall length is a separate dimension and extends beyond the mounting centers.
Can one pull bridge the gap between two cabinet doors?
No. Both fixing points for one pull belong on the same door or panel. Use one independently mounted pull on each door and check clearances before drilling.
Installation & care
Installation — two-hole pulls
For replacements, match the center-to-center (C-C) distance between the existing screw holes; this is different from overall length. Check panel thickness and clearance before drilling. Hold the pull outside the cabinet front and insert both screws from inside. Start the threads by hand, align the pull and tighten evenly with a hand screwdriver. Do not overtighten.
Mounting screws
Standard 25 mm mounting screws are included. Measure the total panel thickness at the fixing point, including any applied or double-panel layers. If you need a different screw length, add the total thickness to your order notes or contact us before ordering so we can confirm the appropriate option.
Care
Wipe with a clean, soft cloth. For marks, use a lightly dampened cloth with mild soap, remove any residue and dry thoroughly. Avoid abrasive pads, metal polish and harsh cleaners. Do not leave moisture or cleaner on the hardware.
Coordinate the collection
Compare the separate dimensions and fixing positions of the TUCK Flat Bar Cabinet Pull.
Project support
For project support, send the product name, finish, size, quantity, project location and target order date. Include panel thickness and existing hole spacing for replacements. Contact our team or explore the Trade program.
Warranty & Support
Covered by OBJECT & TONE's 10-Year Limited Mechanical Warranty for manufacturing and mechanical defects under normal indoor residential use. For planning and support, see our Hardware Guides, Finish Guide, Care & Installation, Shipping & Returns, or Contact.
Complete the room.
Matching hardware from the same design family.
